在摄影领域中 , 车内拍摄及跟车拍摄在摄影镜头中越来越多 , 经常需要拍摄汽车内外的各种对话、动作、等镜头来实现故
事情节的延伸 。由于汽车的运动状态总是发生快速的变化，这就要求摄影机在高速运动的汽车中达到良好的拍摄效果。因
此 , 车拍支架成了拍摄环节中必不可少的设备了。
如影 S 车拍轻便支架的组成包括三个部分，分别是载重吸盘、多功能滑板支撑组合、减震系统。这套系统可以根据具体的
拍摄需求吸附在任何一辆家用车上，除了推荐的四种安装方式外还有无限种可能，他可以像乐高一样搭建出你想要的机
位，可前可后，可高可低，整套设备配有四块长短不一的快装板 ，一条载重 7.5kg 减振臂，还有一个减震头，一个供电模块，
和三个大小不一的吸盘。只要有能让吸盘吸附的地方，他就能帮你实现高速车拍。包括我们推出更多的选配件，根据不同的
需求可以任意组合安装，实现更有冲击力的镜头语言，并满足能够方便的拆卸和运输。
Nowadays, in the field of cinema, in-car and car-following shots are becoming more and more common in films. Filmmakers
will often need to shoot scenes. from inside or outside of the car to keep the story line flowing. Because of the erratic motion of
a moving vehicle, cameras have been put into tougher challenges. Therefore, car mount stabilization systems is considered to
be the most essential piece of equipment in this kind of situation.
This Ronin S lightweight car mount stabilization system is divided into three parts: the heavy load suction discs, the multi-func-
tional sliding support platform and the shock absorbing system. This stabilization system can be mounted to any vehicle to
comfortably fulfill your shooting requirements. Apart from the five mounting configurations that we recommend, you also can
build your own LEGO style stabilization system in various ways. The whole system is equipped with four quick release plates
that vary in length, one 7.5kg payload shock absorbing arm, one shock absorbing head and three different sized suction discs.
Moreover, we provide a variety of accessories to achieve even more possibilities.
01
燕尾支撑板L2
燕尾支撑板L1
吸盘
按压式抽气阀
燕尾支撑板L4
燕尾支撑板L3
燕尾滑块固定旋钮
供电模块
钢丝减震头
如影S供电底座
减震头接驳件
spring arm
Dovetail sliding plate locking knob
Dovetail support plate L2
Dovetail support plate L3
Dovetail support plate L1
Dovetail support plate L4
Power supply module
Steel wire shock absorbing head
Ronin S power supply baseplate
Shock-absorbing head connector
Suction valve
suction disc
减震臂
ALIEN ARM
INTRODUCTION OF ALIEN ARM
认识
To Next Page
Loading...