21
Adding the indoor chime
We recommend pairing the indoor chime with Bella prior to installing outdoors:
Step 1
Plug the chime in to a wall socket, you will see the two LED lights turn a solid red
Step 4
The chime will now show solid red and blue LED lights - this indicates the pairing has been successful.
Step 3
Then press the doorbell - the doorbell will ring and begin flashing blue
Step 2
Hold down the Pairing button for two seconds, the status light will flash red - the chime is in pairing mode
Speaker
Status light
Pairing button
Ringtone button
Volume button
Ringtone button: Press this button to change ring tones - choose
from four ringtones.
Volume button: Press the button to adjust the chime volume.
Pairing button: Press for 1-2 seconds to pair the doorbell.
Press for 5 seconds to restore factory settings.
To Next Page
Loading...