4. Click on Noah Alarm System
5. Press the icon on the Noah dashboard to enter the
accessories menu
6. Press the (+Add) icon. The Noah hub LED will turn purple when it is
ready for pairing.
7. Then press the pairing button on the back of the siren. The siren
will enter pairing mode – the strobe LED will come on and the siren
will make a beeping sound
8. Use the remote control to arm Noah
9. Then press the pairing button on the back of the siren again
10. Lastly, test the outdoor siren by using the remote control to arm
Noah again. The outdoor siren will also make a beeping noise.
Please note: As the siren acts as a repeater to the Noah Hub, it does
not appear in the Accessories menu.
Where to install the outdoor siren
Fit the siren to the outside of your home where it is clearly visible and
at a height that is not easily accessible by an intruder.
Mount the siren at a distance of more than 1 metre away from any
external or internal metalwork such as drainpipes, gutters, radiators
etc.
To Next Page
Loading...