1. Setting up your Time2 MIP11 Wireless Surveillance Camera
a) Connect the Camera to a power supply
1. Insert the power adapter plug into the port at the back of the camera
2. Connect the other end of the power adapter to a suitable mains power socket
b) Connect the Camera to your wireless internet router
1. Insert one end of the Ethernet (Internet) cable into a port on your wireless router
2. Connect the other end to the port at the back of the camera
c) Go to www.time2technology.com to download and install the IP Camera software onto your computer
d) Connect and view the camera by entering the Username
and Password at the back of the unit
For a detailed User Manual and setup video, please go to www.time2technology.com
To Next Page
Need help?
General
