Timex Sinclair 1000 - Page 2

PAGE 56 — EXERCISES — LINE 10 OF EXERCISE
PRESENTLY READS: 1¢ FOR 1=9 TO 2¢
SHOULD READ: 19 FOR |=¢ TO 29
PAGE 58 — FOURTH LINE FROM BOTTOM OF PAGE
PRESENTLY READS: GRAPHICS to get the cursor; and then press
shifted T.
SHOULD READ: GRAPHICS to get the black box G cursor; and
then press shifted T.
PAGE 64 — FIRST PROGRAM — LINE 19 OF PROGRAM
PRESENTLY READS: 1¢ PLOT INT (RND* 44)
SHOULD READ: 19 PLOT INT (RND* 64) INT (RND* 44)
PAGE 72 — SECTION 6 — LAST PARA. — FIRST SENTENCE
PRESENTLY READS: The T/S 1000 uses p = 65537 and a= 75, and
stores some b;1 in memory
SHOULD READ: The T/S 194% uses p = 65537 and a= 75, and
stores some arbitrary b;-1 in memory.
PAGE 72 — SECTION 6 — LAST PARA. — LAST LINE
PRESENTLY READS: b, equal to n+1.
SHOULD READ: b, equal ton+1.
PAGE 77 — SECTION 3 PROGRAM
PRESENTLY READS:
19 PAUSE 4¢9¢¢
20 POKE 16437,255
306 PRINT INKEY$
49 GOTO 1¢
SHOULD READ:
19 PAUSE 466060
20 PRINT INKEY
PAGE 77 — SECTION 4 — PROGRAM
PRESENTLY READS: 1¢ LET T=50
15 REM T= NUMBER OF FRAMES PER TURN
— INITIALLY 5@ FOR 1 SECOND
36 LET AS=CHRS$ INT (RND* 19+CODE “9”)
35 REM AS IS A RANDOM DIGIT
46 PRINT A$
45 PAUSE T
5@ POKE 16437,255
6@ LET BS=INKEY$
SHOULD READ: 1@ LET T=60
15 REM T= NUMBER OF FRAMES PER TURN
INITIALLY 66 FOR 1 SECOND
26 LET A$S=CHR$ INT (RND* 19+CODE “¢”)
REM AS IS A RANDOM DIGIT
PAGE 3
PAGE 77 — SECTION 4 — PROGRAM CON’T
4) PRINT A$
50 PAUSE T
6@ LET BS=INKEY$
PAGE 91 — EXERCISES — #1. — LINE 6
PRESENTLY READS: “‘N Characters”.
SHOULD READ: “Na Characters’.
PAGE 113 — 1ST LINE ON PAGE
PRESENTLY READS: example in the last chapter might be”
SHOULD READ: “example in Chapter 9 might be
PAGE 119 — SECOND PARAGRAPH — FIRST LINE
PRESENTLY READS: The illustration at right shows
SHOULD READ: The illustration in this chapter shows
PAGE 123 — LAST LINE
PRESENTLY READS: On return, the iy and i registers must have the
values 49h and 1 Eh.
SHOULD READ: On return, the i register must have the value 1 Eh.
PAGE 135 — NOTE SN2
PRESENTLY READS: Address of area used for calculator’s memory.
(Usually MEMOT, but not always.)
SHOULD READ: Address of area used for calculator’s memory.
(Usually MEMBOT, but not always.)
PAGE 4
Dear T/S 1000 Owner,
A review of the Timex Sinclair 199@ User Manual has reveal-
ed several key functional instructions which require clarification
and/or correction to assure easy use and more accurate
understanding of the T/S 100@ computer and its many applica-
tions, Please refer to the list as you reach the corresponding
paragraphs in your manual, The changes are underlined in red
for simple identification, eS re. WR ee ee
If you would like to receive a copy of the User Manual from
the second printing which will incorporate these clarifications,
please fill out the form at the end of the clarifications list and
mail to the address indicated.