info@adjustme.eu | www.adjustme.eu | © 8/2020 by ADJUSTME | All rights reserved | A part of Group
1
Data sheet for TC15P/TC15S
Control box TC15 P TC15 S
Dimension (L x W x H)
240 x 94 x 39,6 mm 240 x 94 x 39,6 mm
MCU
STC15F2K48AS STC15F2K48AS
Switching Power Supply
SPM-120Q SPM-120Q SPM-73Q SPM-73
Power consumption in standby
< 0.1 W < 0.1 W (bluetooth) < 0.1 W < 0.5 W *
Wake up time
0.1 second < 0.4 second 0.1 second (0.1 second)
Works with TEKxx
01-03-04/TL25 01-03-04/TL25 N/A
Max load, complete frame
120 KG/80 KG 100 KG/60 KG N/A
Rated input
AC 100 - 240V 50/60Hz AC 100 - 240V 50/60Hz
Rated output
32 V 32 V
Power consumption in use
Full load: 280 W / Average: 160 W Full load: 180 W / Average: 120 W
Duty cycle
10%, Max 1 min. run / 9 min. stop 10%, Max 1 min. run / 9 min. stop
Connection of actuators
2 columns 2 columns
Lifetime
10.000 cycles 10.000 cycles
Soft start/stop function
15 mm 15 mm
Sensi Touch, Built-in**
Drive back: 50 mm Drive back: 50 mm
Pre-set of min/max height
✔ ✔
Error tracing
✔ ✔
Exchangeable AC cable
✔ ✔
Safety functions
Overload/overcurrent protection Overload/overcurrent protection
Overheat protection Overheat protection
Unbalance protection Unbalance protection
Wireless charger
Optional Optional
USB Charger
Optional Optional
Bluetooth App, Built-in
Optional Optional
Bluetooth App, Dongle
Optional Optional
Sensi Touch, Dongle**
Optional Optional
Battery
Optional N/A
Programmer
Optional Optional
* No standby facility - no wake up time
** Note: ➊ Sensi touch is blocked for the first 30 mm (in both directions) to prevent unintended activation caused by eventually unsynchronization in the start-up phase.
➋ For sensi touch to work properly the control box MUST be fixed to the frame