Tineco FLOOR ONE SWITCH S7 Series User Manual

44
EN
Vacuum Cleaner
①
②
To install, insert the SwitchPro Motor into
the vacuum cleaner, push it in, installation is
complete when you hear a click.
To remove the SwitchPro Motor, hold the
appliance with one hand and press the release
slider with the other hand.
Connect the brush, tube and main body as shown above.
or
click
Connect the accessory tool to the main body. Insert the drying & charging dock into
the vacuum dock as shown. Installation is
complete when you hear a “click.”

Tineco FLOOR ONE SWITCH S7 Series Specifications

General

Brand	Tineco
Model	FLOOR ONE SWITCH S7 Series
Category	Cleaning Equipment
Language	English