48
EN
Cleaning Mode Selection
Floor Washer
AUTO Mode
• In AUTO mode, the iLoop sensor automatically detects how dirty
the oor is and applies the appropriate amount of detergent and
suction power.
• A red dirt monitoring loop indicates more dirt is detected, and a
blue loop indicates less dirt is detected. This mode automatically
provides the best cleaning solution.
MAX Mode
• In AUTO mode, press the button once to enter MAX mode.
• In MAX mode, the appliance will apply max suction power and will
spray water/solution for embedded stains.
SUCTION Mode
• In AUTO mode, press the button twice to enter SUCTION
mode.
• In SUCTION mode, the appliance will absorb water. We
recommend using this mode on wet surfaces.
CUSTOM Mode
• This mode allows users to freely set the appliance parameters on
the app to enjoy a fully customized furniture cleaning experience.
To Next Page
Loading...
