59
EN
Brush Roller (Vacuum Cleaner)
①
②
③
Slide the switch to open the brush roller end
cover, and rotate it clockwise before pulling
out the brush roller.
After removing the brush roller, gently clean
the brush window, suction mouth and the row
of plastic teeth.
①
②
Fully reinsert the brush roller into the brush
window and the end cover can be rotated
counter-clockwise until it clicks securely back
into place.
Warning:
• The power brush contains electrical components which must not be soaked or washed with water.
• To reduce the injury, do not touch the brush roller while the appliance is in working condition.
SCAN THE QR CODE BELOW TO
GET PRODUCT CARE VIDEOS.
To Next Page
Loading...
