To Next PageTo Next PageWhat to do if my Tineco iFLOOR 3 BREEZE Vacuum Cleaner does not turn on?
If your Tineco Vacuum Cleaner does not turn on, try the following: * Charge the appliance. * Empty the dirty water tank (DWT) and reinstall it. * Clean the sponge and filter. * Remove any blockages.
General| Type | Wet Dry Vacuum Cleaner |
|---|---|
| Model | iFLOOR 3 BREEZE Series |
| Cordless | Yes |
| Battery Type | Lithium-ion |
| Battery Voltage | 21.6V |
| Battery Capacity | 2500mAh |
| Clean Water Tank Capacity | 0.6L |
| Dirty Water Tank Capacity | 0.5L |
| Weight | 4.5 kg |
| Weight (lbs) | 9.9 lbs |
| Self-Cleaning | Yes |
| LED Light | Yes |
| Warranty | 2 years |
| Noise Level | 78 dB |
For water tank and brush assembly, see 'Operation' and 'Maintenance' sections.
Charge for 4-5 hours before first use, then turn on the appliance.
Remove tank, fill with tap water to Max line, add solution if needed, and close cap securely.
Connect charger to appliance and outlet when the indicator blinks red.
Learn about indicator lights for low power, regular mode, and charging.
Switch off, clean surface with neutral detergent and a dry cloth.
Empty DWT, rinse tank and filter, and dry parts completely.
Clean brush roller cover and roller, ensure proper latching to prevent leakage.
Place appliance on tray, plug in, and hold for 3s to start self-cleaning.
Applies to purchases from authorized retailers and is subject to manual's requirements.
Lists warranty exclusions, such as unauthorized use or parts.
Implied warranties limited to this warranty's duration; coverage is for the original owner.
Register appliance online and retain proof of purchase to claim warranty service.
