TINY LAND Tent2001 - Page 2

Assembly Instructions
TINY LAND
Please tightly insert the rods into the connectors, or the fabric cover
might not fit.
A
1
A
12
1
Use connector tube #
1
to connect two
poles
A
together, a total of 12 groups.
3
1
1
2
Follow the picture to connect poles
assembled in step 1 via connector #3 .
3
Repeat step 2 to set the frame bottom in the picture. Please note that the empty side of
connector tube #
3
should face upwards vertical.
󰄣
@tinylandus www.tinylandus.com @tinylandtoy customer_care@tinylandus.com
x