Page 7Ceramic Hob User Manual
Electrical Connection
Electrical Connection and Safety
1. Setting conditions of this appliance is
indicated in tag or data plate.
2. Your appliance should be plugged in
a fuse appropriate for electric power.
If necessary, it is recommended that
installation is done by authorized service.
3. Your appliance is congured in accordance
with electrical supply of 220-240V AC/380-
415V3N AC 50/60Hz.
4. If main electrical network is dierent from
these values, contact with your authorized
service.
5. Electrical connections of your appliance
should only be made to the fuses having
suitably wired grounding (grounded)
system. If no convenient fuse is available
in the place where your appliance is to be
installed, contact with authorized service
immediately. Manufacturing rm is not
responsible denitely for the damages
that fuses whose grounding is not made
and connected to the appliance can cause.
6. Plug of the appliance should be close
to be accessed easily to the fuse whose
grounding is made without use of
extension cord.
7. Do not allow contacting the power cable
of your appliance with hot regions.
Similarly, keep away it from sharp edges
and corners.
8. If feeder cord is damaged, this cord should
be replaced either by manufacturer or its
service agency or same degree qualied
personnel in order to hinder a dangerous
situation.
9. Wrong electrical connection may give
damage to the appliance.In this case, your
appliance will remain out of guarantee
scope. Electrical connection of your
appliance should be done by authorized
service.
10. During operation of cooktop, some parts
may be hot. When you also bring switches
closed position, it may remain hot for a
while. Children should be kept away every
time and not be le without observation.
Do not touch surface of cooktop while
warning lights ashes. When you bring
your appliance closed position, hot parts
being still dangerous are stated with
warning lights. (Vitroceran models).
To Next Page
Loading...
