Units display
SETTING > UNITS
SETTING > BEEP
Setting mode
Select mode 12/24 hours – in
12 hour mode, the letter A
(AM) or P (PM) appears be-
tween minutes and seconds
when setting the time
Select Mode
"º C / m" or "º F / ft"
Validate setting.
Selecting 12 hour mode
displays the date in the format
12.27.2007 (month, day, year),
and 24 hour mode in the format
27.12.2007 (day, month, year).
Beep display Setting mode
Activated = on ,
Deactivated = off
Validate setting
2 sec.
2 sec.
or
Deactivating the sound
silences adjustment beeps
but not the alarms.
or
or
READING > OPTIONS
Activate glass
Options display
(see page 4)
Switch to sub-menus:
Units display
Automatic switch to
standby mode after
5 seconds
Beep every second
Back to units display
At any time: exit sub-menu
– back to date display
Climate zone display
Beep display
1 sec.
To Next Page
Loading...
