Tissot T-Touch T001.520.47.051.00 - ALTIMETER; THERMO

ALTIMETER
THERMO
Indication of altitude in relation to sea level
Indication of the temperature
(1)
Activation of the crystal
(1) The altitude is displayed in metres or feet depending on the units selection (see
“Selectingtheunits”onpage6).After30seconds,thehandsshowthetimeagain
butthedigitaldisplayremainsinALTIMETERmode.
 After10h,thedigitaldisplayreturnsto“h-m-s”mode
(2) The adjustment shows the altimeter setting at the value of the actual altitude. For
moreinformation,seetheexplanationofthealtimeteronpage12.
(1) To obtain the best reading, it is necessary to remove the watch from your wrist
andwaitforapproximately15to30minutes.
 Formoreinformation,seetheexplanationofthethermometeronpage13.
(2) The temperature is displayed in degrees Celsius or in degrees Fahrenheit depen-
dingontheunitsselected(see“selectingtheunits”onpage6).
After 30 seconds, the hands display the time again but the digital display remains
inTHERMOmode.
Activation of the altimeter
function
(1)
Adjusting the altitude
(2)
Incrementation or decrementa-
tion (1 m or 3 ft)
Validationofthesetting
Activation of the crystal
Activation of the thermometer
function
1”
2”
+ or - 1 step
1”
138_en / 03.11 9/14 www.tissot.ch