The 24 hour digital timer with 1 minute intervals will display the current time when
operating. It will control eight (8) separate timing programs. There are many com-
binations of timing available to the user. Such as: hourly, daily, weekly or weekly
settings. Keep timer away from spray or pesticides.
Instructions for Operation
1. To set present time:
a. Press ‘CLOCK’ and ‘HOUR’ at the same time for setting the, ‘HOUR’.
b. Press ‘CLOCK’ and ‘MINUTE’ at the same time for setting the, ‘MINUTE’.
c. Press ’CLOCK’ and ‘WEEK’ at the same time for setting the, ‘WEEK’.
2. To program:
a. Press ‘PROG’ to enter into the programming mode. The display will
show ‘1 ON’.
b. Press ‘HOUR’, ‘MIN’ & ‘WEEK’ to set the hour, minute and day of the
week to activate your equipment.
c. Press ‘PROG’ again for setting the off time. The display will show ‘1
OFF’.
d. Repeat (b) above for the off time to deactivate your equipment.
e. Press ‘PROG’ again to enter into the second timed program, ‘2 ON’, etc.
f. Repeat (a) through (d) to continue setting programmed times.
Note: Press ‘R’ for cancelling the time setting. Press ‘R’ again to resume previous
time setting.
3. Combination weekly settings:
a. To program weekly settings press ‘WEEK’ once. This will display: Mo,
Tu, We, Th, Fr, Sa, Su. Now the timer is in the daily on/off program.
b. Press ‘WEEK’ again. Now each week day will display on the timer. Set
the desired day of the week that you’d like the timer to activate and
deactivate. Your timer will only activate on that day of the week.
24 Hour Digital Timer with 1 minute intervals
(OVER)
To Next Page
Need help?
General
