Instructions for Use
1. Mount Eos 1 near humidifier/dehumidifier, or
fan to be controlled, but away from water, mist,
vapor, etc.
2. Switch controller to Humidify or Dehumidify.
3. Set preferred humidity/dehumidity level on dial.
4. Plug equipment to be activated into female
side of piggyback cord set.
5. Turn “On” power to humidifier/dehumidifier/fan
to be controlled.
6. Plug male side of piggyback cord set into 120 volt,
15 amp outlet.
7. The Eos 1 will now activate and deactivate
equipment based on preferred setting.
Controller Specifications
Size: 8"H x 4"W x 2"H
Weight: 2 lbs.
Voltage Input: 120 volts
Voltage Output: 120 volts
Maximum Amperage: 15 amps
Hertz: 60 Hz
Differential: 4%
Min/Max Humidity Control Level: 10% RH to 90% RH
(non-condensing)
Cord Set: 6 feet/14AWG/SWJT
Storage Temperature: 0
o
to 135
o
F
Operating Temperature: 40
o
to 110
o
F
www.titancontrols.net
For technical assistance call us at
1-888-80-Titan or 1-888-808-4826.
Eos 1
TM
Humidify / Dehumidify Controller
Easy Guide
Eos 1
Fan
Dehumidifier
Eos 1
Eos 1
Humidifier
Eos 1
Fan
Dehumidifier
Eos 1
Eos 1
Humidifier
Dehumidifier
Eos 1
VANCOUVER, WASHINGTON U.S.A.
Controlling a Humidifier
Controlling a Fan
Controlling a Dehumidifier
®
®
To Next Page
Need help?
General
