EN
TTI855PRW by TITAN
Getting started...
Before you start
19
Assembly
WARNING!
Do not use a product that is only partly assembled or assembled with
Follow the assembly instructions step-by-step and use the pictures
Do not insert the battery pack before the power tool is completely
NOTE: Take care of small parts that are removed during assembly or
when making adjustments. Keep them secure to avoid loss.
Accessories
ensure they are compatible with this product.
Illustration Description Application
5 in 1 lance (1) To be used in conjunction with
spray gun to provide fan and pin
jet.
Attaching accessories
1. Align and insert the tongues (1a) of the 5 in 1 lance (1) into the grooves of the
spray gun (2) connection port (Fig. 1, step 1).
2. Turn the 5 in 1 lance (1) clockwise (step 2) and then pull it to outside slightly
(step 3) to lock it in place (step 3).
3. Ensure the arrow (1c) is on the top side.
2 1a 1 1c
2.
1.
3.
Fig. 1
Removing accessories
Press the 5 in 1 lance (1) towards the spray gun (2) (Fig. 2, step 1) and turn it
anti-clockwise (step 2) to unlock and remove it (step 3).
MNL_TIT_GB_18 V Handheld pressure washer_GB_V1_211101.indd 19 11/1/21 2:52 PM
To Next Page
Loading...
Need help?
General
