Recommended
cutting attachment
1.Only use accessories recommended by the manufacturer.
2.Never replace the nylon line with a metal wire. RISK OF INJURIES.
Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/ EC.
Reported sound power level for the machine has been measured with the original cutting attachment that gives the highest
level. The difference between guaranteed and measured sound power is that the guaranteed sound power also includes
dispersion in the measurement result and the variations between different machines of the same model according to
Directive 2000/14/EC.
Model
Engine Displacement
Max. Engine power
Max. Engine speed
Recommend idling speed
Type of carburetor Diaphragm type
Fuel tank capacity 900 ml
Fuel mixture Ratio
Noise emmissiona (see note 1) Sound power level, measured dB(A):
Equipped with trimmer head: 107,7 K=3
Equipped with blade: 105,4 K=3
Sound power level, guaranteed LwA dB(A): 113
Noise levels
Vibration levels
Type
Blade
Non-metallic Flexible
cutting line
centre hole diameter
(mm)
Thickness of blade/
diameter of cutting line (mm)
Cutting width
(mm)
Trimmer head
440 2.4
255 1.6 25.4
Equivalent vibration levels (ahv,eq) at handles,
measured according to EN ISO 11806 and ISO 22867,
m/s2
Equivalent sound pressure level at the operator’s
ear, measured according to EN ISO 11806 and ISO
22868, dB(A):
Equipped with trimmer head: 99,5 K=3
Equipped with blade: 98,4 K=3
Sound pressure level, guaranteed LpA dB(A): 102
Equipped with trimmer head:
Left Handle: 5,259 K=1,5
Right Handle: 4,938 K=1,5
Equipped with blade:
Left Handle: 6,566 K=1,5
Right Handle: 9,661 K=1,5
Petrol 25 : Oil 1
Weight without fuel, harness, cutting attachment and guard 7.8 kg
9000/min
3000/min
3 teeth, single piece, metal
62cm3(air-cooled,2-stroke)
2.6 KW/8500/min
TT-BC620T
To Next Page
Loading...