Need help?Do you have a question about the Titoe CNC 3018 pro and is the answer not in the manual?
General| Machine Type | CNC Router |
|---|---|
| Working Area | 300 x 180 x 45mm |
| Frame Material | Aluminum |
| Control Software | GRBL |
| Interface | USB |
| Machine Size | 400 x 330 x 240mm |
| Compatible Materials | Wood, Plastic, Acrylic, PCB |
| Supported OS | Windows |
| Power Supply | 24V 5.6A |
| Power Supply Details | 24V 5.6A |
Steps for assembling the base structure of the CNC machine using aluminum profiles and bakelite plates.
Instructions for installing the work table onto the CNC machine, including lead screws and stepper motors.
Attaching Bakelite plate C to the base assembly, ensuring proper alignment and fastening.
Procedure for assembling the X and Z axes, including guide rails, lead screws, and stepper motors.
Steps for mounting Bakelite plate D onto the CNC machine frame for structural support.
Guidance on how to correctly install the spindle motor onto the CNC machine assembly.
Instructions for mounting and securing the control board and fan within the machine.
Visual guide detailing all necessary electrical connections between components.
Process for installing the required driver for the Grblcontrol software.
Steps to open and configure the Grblcontrol software, including port and baud rate settings.
Checking the successful connection status between the computer and the CNC machine via Grblcontrol.
Identifying common reasons for connection failure and their solutions for Grblcontrol.
Basic usage instructions for the Grblcontrol software, including speed and jog controls.
How to set the work zero point (XY and Z) using the jog controls in Grblcontrol.
Performing initial tests to ensure the machine is assembled correctly and functional.
Verifying the spindle operation and the movement of X, Y, and Z axes.
Diagnosing and resolving issues related to unresponsive axes on the CNC machine.
Guidance on preparing and executing G-code files for engraving operations.
Instructions for downloading and installing the LaserGRBL software.
Using the jog controls in LaserGRBL to test and verify machine movement.
Process for importing and preparing raster images for laser engraving using LaserGRBL.
Adjusting laser power and focus for optimal engraving results.
Steps to initiate and monitor the laser engraving process.
How to save your work as an NC file for use with an offline controller.
Setting up and utilizing custom buttons in LaserGRBL for streamlined operation.
Steps to connect the offline controller to the computer and the control board.
Procedure for copying G-code (NC) files onto the offline controller.
Physical connection of the offline controller to the main CNC control board.
Using the offline controller's keys to set the machine's origin point.
Overview of the Menu, Control, and File pages of the offline controller interface.
Essential safety precautions for operating the CNC machine, including personal protection and operational environment.
To Next Page