TJERNLUND SS1 SIDESHOT (DISCONTINUED VERSION-PRE UC1 UNIVERSAL CONTROL) 8504041 REV A 1199 User Manual

Copyright © 1999, Tjernlund Products, Inc. All rights reserved P/N 8504041
OWNER INSTRUCTIONS, DO NOT DESTROY
Recognize this symbol as an indication of important Safety Information!
NOTE: FLUE GAS TEMPERATURES MUST NOT EXCEED
650
o
F AT VENT SYSTEM INLET.
THESE INSTRUCTIONS ARE INTENDED AS AN AID TO QUALIFIED, LICENSED
SERVICE PERSONNEL FOR PROPER INSTALLATION, ADJUSTMENT AND
OPERATION OF THIS UNIT. READ THESE INSTRUCTIONS THOROUGHLY
BEFORE ATTEMPTING INSTALLATION OR OPERATION. FAILURE TO FOLLOW
THESE INSTRUCTIONS MAY RESULT IN IMPROPER INSTALLATION, ADJUST-
MENT, SERVICE OR MAINTENANCE POSSIBLY RESULTING IN FIRE, ELECTRI-
CAL SHOCK, CARBON MONOXIDE POISONING, EXPLOSION, OR PERSONAL
INJURY OR PROPERTY DAMAGE.
!
DO NOT DESTROY. PLEASE READ CAREFULLY AND
KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.
MODEL SS1
INSTALLATION INSTRUCTIONS
REV. A 11/99
T0890551100
TJERNLUND PRODUCTS, INC.
1601 Ninth Street • White Bear Lake, MN 55110-6794
PHONE (800) 255-4208 • (651) 426-2993 • FAX (651) 426-9547
Visit our web site • www.tjernlund.com

TJERNLUND SS1 SIDESHOT (DISCONTINUED VERSION-PRE UC1 UNIVERSAL CONTROL) 8504041 REV A 1199 Specifications

General

Brand	TJERNLUND
Model	SS1 SIDESHOT (DISCONTINUED VERSION-PRE UC1 UNIVERSAL CONTROL) 8504041 REV A 1199
Category	Fan
Language	English

Summary

Product Overview and Specifications

Description and Application

Overview of the SideShot system and its application table for different appliances.

Specifications and General Information

Technical specs, ratings, and general handling instructions for the SideShot.

Safety, Restrictions, and Terminology

Installation Restrictions and Cautions

Key limitations, warnings, and safety precautions for SideShot installation.

Appliance Safety Inspection

Procedures for inspecting used oil and gas appliances before SideShot installation.

Terminology and Clearances

Defines terms and specifies clearance requirements for vent hood and plenum.

Installation Procedures

Tools and Vent Hood Installation

Lists required tools and guides for installing the vent hood and terminus.

Plenum, Bracing, and Bracket Installation

Steps for installing the plenum, notch bracing, and wall support bracket.

Vent Pipe Installation and Connections

Instructions for vent pipe connection, collar conversion, and clamp assembly.

Electrical Wiring

Oil Fired Appliance Wiring

Wiring diagrams and sequence of operation for oil-fired appliances.

Gas Fired Appliance Wiring

Wiring diagrams and sequence of operation for gas-fired appliances.

Draft Adjustment and Operation

Draft Adjustment Procedures

How to adjust the draft for oil and gas appliances based on conditions.

Combustion Air and System Check-out

Importance of combustion air and steps for system operation check-out.

Troubleshooting

Troubleshooting Oil Odors and Electrical Problems

Guides for diagnosing and resolving oil odors and electrical issues.

Symptom-Based Troubleshooting

Guides for common operational symptoms like motor behavior and appliance operation.

Maintenance and Warranty

Maintenance Procedures

Instructions for inspecting, removing, and replacing the blower wheel assembly.

Warranty and Claim Information

Details on parts warranty, claim procedure, and coverage.