Injection Molding Machine Chapter 6
V3.0
6-3
2.4 Maintenance and check chart
2).Grease lubrication refer to the drawing E0001-LUB03 (page 5-8)
Hydraulic oil temperature control
Checking, made only by a skilled specialist
Filling oil for centralized lubrication system
1).Refer to the TM3 operation manual's
Visual control
Cleaning
Drain
2.2.I
E0001-CHK01
inspection items on page 5-2
(hydraulic oil : use 46cSt/ 40°C)
To Next Page
Loading...