Injection Molding Machine Chapter 7
7-7
V3.0
CAUTION
Motor overload protector has been adjusted upon factory delivery，unless it doesn’t
comply with set value. Do not make any adjustment arbitrarily
Set current value of various machine models Operation
Voltage
60E 90E 120E 150E 200E 250E 350E 500E 750E 1000E
220V 40A 54A 38A 38A 45A 65A 85A 105A 38+105A 105+105A
380V 26A 35A 22A 26A 33A 41A 51A 61A 22+61A 61+61A
The values above may differ from your machine，please contact TMC for details before you adjust
overload protector.
To Next Page
Loading...