TMEC 200-1 - CHAIN ADJUSTMENT AND LUBRICATION

Note
Chain with
excessive
looseness
will damage
the
engine body.
4.check
sprocket
tooth
abrasion.
Replace it if
necessary.
5.if chain
or sprocket
is excessive
worn
or damaged,
replace them.
Do
not
use new
chain and wom
sprocket,
it
will accelerate
abrasion.
ADJUST
If necessary,
should
check
and adjust
the chain
elasticity every
1000km
driving
as follows:
l.make
gearshift
in
neutral position,
close
ignition lock.
stop motorcycle
in
horizontal ground.
2.loose
rear
axle nut.
3.loose
the lock
nut of two
sides chain
adjuster.
31
ED