TMEC 200-1 - Page 40

r 2.dismantle
the electdc
wire
connecting
junction
r
3.take off the
safety fuse,
if the
main fuse
is damaged, set
the
new fuse.
I 4.connect
the
connecting
junction,
install the
left side cover.
,
MAINTAIN
LIGHT
SET
r
Should keep the
headlight
clean
r
Clean
by soft cloth
with
alcohol, do
not use dry cloth
or the hand.
'
r
Check
the connecting
situation
of light
cable and the
switch assy
cable.
r
Should
be very careful
when
clean the handle
bar switch
to avoid
sewase.
MAINTAINHORN
r When
the horn sounds
poor,
should
check power
first, them,
check
the
button. Adjust
the adjusting
nut
under the
horn to check
the
sound. Too
loosed or too tightened
nut
will
decrease
the horn
sound.
OEAN
,
I Should
clean motolcycle
regularly
to
protect
paint.
And should
check
whether
the vehicle
is damaged.
Check the
brake liquid
leakage.
r
Do not use
the
products
which
are not special
for cleaning
motorcycle.
They may
damage the
metallic &
i
plastic
part
of
motorcycle
r If
the motorcycle
remains
very hot
,clean
it after the
engine
and the
exhaust
system cool.
r
Avoid
to use the high-pressure
water to
eiect.
37