Toa D-921E - Page 2

DIGITAL AUDIO PROCESSOR
DP-K1
APPEARANCE AND
DIMENSIONAL DIAGRAM
XLR Connector
Removable Terminal
Block Connector
24 bit
20 bit
A/D
Converter
Mic/Line Input Modules
Digital Input Modules
Monaural type
Stereo type
D-921F
2-Channel input module for mic
and line inputs (selectable) with
XLR connectors, adjustable
input sensitivity, and phantom
power.
D-922F
2-Channel input module for
mic and line inputs (selectable)
with XLR connectors and DIP
switches for input sensitivity,
phantom power and ground lift.
D-922E
2-Channel input module for mic
and line level inputs (selectable)
with removable terminal block
connectors, input sensitivity
DIP switches, phantom power
and ground lift.
D-936R
4 stereo input
module equipped
with standard RCA
jacks. This module
features two stereo
transmission
mode:
1) Selection of one
of the four stereo inputs.
2) Mixing of all four stereo inputs,
transmitting the mixed signal to the
D-901 though left/right channel
outputs.
D-937SP
Single channel stereo digital input
module. With the use of this module,
digital signals can be input, permitting
direct connection of the D-901 to
equipment having a digital output.
Owing to the built-in sample rate
converter, the module can handle
signals of various sampling frequencies.
D-923AE
2-Channel digital input module. With
the use of this module, digital signals
can be input, permitting direct
connection of the D-901 to equipment
having a digital output. Owing to the
built-in sample rate converter, the
module can handle signals of various
sampling frequencies.
Applicable AES/EBU Format
D-921E
2-Channel input module for mic
and line level inputs
(selectable) with removable
terminal block connectors,
adjustable input sensitivity and
phantom power.
Applicable S/PDIF Format
Modules
482.6
466
420
Rear View
Front View
Side View
320
57.3
132.6
37.7
Modular design allows you to configure the most cost-
effective design for each application.
TOA offers a range
of modules to suit
a variety of input and
output requirements.