Toa F-2352SC - Mounting to Ceiling Frames; Mounting in Oversized Holes; Mounting with Anchor Bolts

5
HY-TB1 (optional)
Ceiling panelHY-RR2 (optional)
Ceiling frame
HY-TR1
(optional)
ø200 – ø300 mm
(7
7
/8" – 11
13
/16")
Ceiling panel
HY-RR2 (optional)
Speaker unit
2-2. Mounting to a ceiling frame
Use the optional HY-RR2 Reinforcement Ring in conjunction with the optional HY-TB1 Tile Bar Bridge.
Note
Refer to the instruction manual included with the HY-TB1 for the correct ceiling mounting procedure.
[Installed HY-TB1 and HY-RR2]
2-3. Ceiling mounting in a larger than specified hole
Use the optional HY-RR2 Reinforcement Ring in conjunction with the optional HY-TR1 Trim Ring.
Note
Refer to the instruction manual included with the HY-TR1 for the correct ceiling mounting procedure.
[Installed HY-TR1 and HY-RR2]
2-4. Mounting to an anchor bolt
Use the optional HY-RR2 Reinforcement Ring in
conjunction with the optional HY-AH1 Anchor
Hanging Bracket.
Note
Refer to the instruction manual included with the
HY-AH1 for the correct mounting procedure.
Anchor bolt
Ceiling panel
HY-AH1
(optional)
HY-RR2 (optional)
[Installed HY-AH1 and HY-RR2]