Toa PE-304 Specification Sheet

PE-304
Pendant Speaker System
DESCRIPTION
FEATURES
The PE-304 are HIPS resin bass-reflex enclosure 5" (12cm) cone-
type pendant speakers intended for ceiling suspension installation.
The PE-304 also includes a balanced dome tweeter. They have an
outstandingly stylish design that is inspired by the finest lighting
fixtures, allowing them to harmoniously blend in with lighting
equipment. They are ideally suited for such applications as BGM and
announcements at high-ceiling venues such as airports, factories and
shopping malls. The speakers are easy to repaint, extending the
range of design needs they can meet. A directly attached sturdy
suspension cable is extendable up to
16.4 ft. (5 meters).
PE-304 is driven on a high- and low-impedance(8) line.
Input impedance is adjustable with rotary switch on the upper
side of the speaker.
• Stylish and outstanding design inspired b
y the finest
lighting fixtures
• Sturdy cable extendable up to 16.4 ft. (5 meters)
• Repaintab
le
• Input impedance easily changeable
• Ideally suited for BGM and announcements
SPECIFICATIONS
APPEARANCE AND
DIMENSIONAL DIAGRAM
4–ø5 (ø0.2”)
36 (1.42”)
ø186 (ø7.32”)
ø100 (ø3.94”)
50 (1.97”)
23 (0.91”)
90
(3.54”)
Max.5000
(16.4 ft)
251 (9.88”)
75 (2.95”)
58 (2.28”)
ø16 (ø0.63”)
PE-64
Enclosure: Bass-reflex type
Rated Input: 6W (100V line), 3W (70V line)
Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10 kΩ(1W)
70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 10 kΩ (0.5W)
Sensitivity (1W, 1m): 90dB (500 – 5,000Hz, pink noise)
Frequency Response: 100 – 18,000Hz (peak –20dB)
Speaker Component: 5" (12cm) cone-type
Speaker Cord: 2-core cabtyre cord 5m (16.4 ft)
Applicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: ø0.8 – ø1.6mm (equivalent to
AWG 20 – 14)
7-core twisted copper wire: 0.75 – 1.25mm
2
(equivalent to AWG 18 – 16)
Connetion:
Push-in connector (bridging terminal-2 branch type)
Finish: Enclosure: HIPS resin, off-white (RAL 9010 or
equivalent colour)
Grille: Surface-treated steel plate net, off-white
(RAL 9010 or equivalent colour), paint
Dimensions: ø186 × 251(H) mm (ø7.32" × 9.88") (unit only)
Weight: 1.5kg (3.31 lb) (unit only)
Accessory: Ceiling bracket × 1, Mounting hanger × 1, Ceiling
cover × 1, Speaker mounting screw (4 × 16) × 4
PE-304
Enclosure: Bass-reflex type
Rated Input: 30W (100V , 70V line, 8Ω)
Rated Impedance: 100V line: 330Ω (30W), 500Ω (20W), 670Ω (15W) ,
1kΩ (10W), 2kΩ (5W)
70V line: 170Ω (30W), 250Ω (20W), 330Ω (15W),
500Ω (10W), 1 kΩ (5W)
8Ω (30W)
Sensitivity (1W, 1m): 91dB (500 – 5,000Hz, pink noise)
Frequency Response: 70 – 20,000Hz (peak –20dB)
Speaker Component: 5" (12cm) cone-type + balanced dome tweeter
Speaker Cord: 2-core cabtyre cord 5m (16.4 ft)
Applicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: ø0.8 – ø1.6mm (equivalent to
AWG 20 – 14)
7-core twisted copper wire: 0.75 – 1.25mm
2
(equivalent to AWG 18 – 16)
Connetion:
Push-in connector (bridging terminal-2 branch type)
Finish: Enclosure: HIPS resin, off-white (RAL 9010 or
equivalent colour)
Grille: Surface-treated steel plate net, off-white
(RAL 9010 or equivalent colour), paint
Dimensions: ø186 × 251(H) mm (ø7.32" × 9.88") (unit only)
Weight: 2.1kg (4.63 lb) (unit only)
Accessory: Ceiling bracket × 1, Mounting hanger × 1, Ceiling
cover × 1, Speaker mounting screw (4 × 16) × 4
Wiring Diagram
(Factory–preset wiring)
Note: Never connect the 8 Ω terminal to the 100 V or 70 V line.
Rotary switch 1
HOT
Matching
transformer
Network
8Ω
2kΩ 16Ω
8Ω
OFF
OFF
OFF
70V
100V
1kΩ
670Ω 0Ω
500Ω 8Ω
330Ω
COM 0Ω
COM
Rotary switch 2
(Factory–preset wiring)
Rotary switch
HOT
Matching
transformer
OFF
OFF
OFF
10kΩ
3.3kΩ
8Ω
1.7kΩ
COM
0
COM
PE-64
PE-304

Toa PE-304 Specifications

General

Brand	Toa
Model	PE-304
Category	Speakers
Language	English