Tobbi TH17P0491 - Attach the Trailer Linkage & Driving Wheel

1
3
4
6
2
5

E
Turn the vehicle body downside up.
1. Fit the trailer linkage to the vehicle
body.
2. Insert four Ø4x12 flat head screws
through the trailer linkage and into
the vehicle body and tighten with a
screwdriver.
3. Slide a driving wheel onto the rear axle. Ensure the driving wheel match up with gear box on the
vehicle body.
4. Slide a Ø8 washer onto the rear axle.
5. Tighten a lock nut to the end of the rear alxe.
Repeat steps 3-6 for the other driving wheel.
6. Insert the driving wheel hubcap to the driving wheel.
$WWDFKWKH7UDLOHUOLQNDJH'ULYLQJZKHHO
Rear Bottom View
Rear Bottom View