Right and Left Brackets Assembly
Place the right and left brackets(I) at the corresponding holes on
the body(A) and tighten them with screws(K) .
AI
I
K
K
K
K
K
Front and Rear Wheeels Assembly
Assemble a washer(J), the front wheel(D), and a washer(J) step
by step(as shown), then use a cotter pin(N) to tighten, finally insert
the wheel cover(C).
Assemble the rear wheel(D) and a washer(J) step by step, then use
a cotter pin(N) to tighten, finally insert the wheel cover(C).
Install the other side in the same way.
D
C
J
J
J
N
N
Steering Wheel Assembly
Connect the two lines as shown in the picture, then insert the
steering wheel(B) to the direction lever, finally tighten with the
screw(M) and nut(L).
B
M
L
7 8
Assembly Steps
Assembly Steps
To Next Page
Loading...