Rearview Mirror Assembly
Insert the right and left rearview mirrors(H) into the corresponding
holes as shown.
Power display
Charging hole
Intercom hole
Power button
Siren button
High and low speed
Forward and backward
Forward
Speed
Backward
Left Right
Indicator light
Stop
Linking the remote control:
1.Press and hold the frequency key for 2 to 4 seconds. The low
speed LED lights will flash.
2.Turn the vehicle on. The low speed LED lights will stop flashing
and remain on to indicate a successful link.
3.If the low speed LED lights continue to flash(indicating an
unsuccessful link), remove the battery on the remote and repeat
steps 1 and 2.
Insert 2 AAA batteries into the remote control.
After 10 seconds of non-operation, the indicator light will turn off
and the remote will go into power-saving mode.
H
H
11 12
P
S
HIGH SPEED
LOW SPEED
Assembly Steps
Funciton Diagram and Operation Method
Funciton Diagram and Operation Method
To Next Page
Loading...