TOBIAS GRAU XT-A FLOOR PLUS 120 - User Manual

XT-A FLOOR/TABLE PLUS 120 LED OSA
XA20-0
XA20-1
XA20-2
XA20-3
XA20-4
XA20-5
XA20-6
XA21-0
XA21-1
XA21-2
XA21-3
XA21-4
XA21-5
XA21-6
XA22-0
XA22-1
XA22-2
XA22-3
XA22-4
XA22-5
XA22-6
XC20-0
XC20-1
XC20-2
XC20-3
XC20-4
XC20-5
XC20-6
XC21-0
XC21-1
XC21-2
XC21-3
XC21-4
XC21-5
XC21-6
XC22-0
XC22-1
XC22-2
XC22-3
XC22-4
XC22-5
XC22-6

Summary

Luminaires Collection

Mounting the Base

Mounting the Table Adapter

Mounting the Lamp Head

Fine Adjustment, Setup, and Care Instructions

Fine Adjustment

Adjust the horizontal position of the lamp head by turning the levelling screw.

Lamp Head Protection

Protect the lamp head from contamination during construction or cleaning with a cloth cover.

Power Connection and Cable Replacement

Connect to 220-240V outlet. Damaged power cables must be replaced by the manufacturer.

Care Instructions

Clean the luminaire with a dry microfiber cloth. Do not use chemical additives. Clean after cooling.

Functional Description

Dimmer Switch Operation

Details on how to turn the light on/off, dim up, and dim down using the switch.

Sensor and Constant Light Controller

Explains automatic adaptation to ambient brightness and motion detection for light control.

Functional Description: Settings and Range

Factory Settings

Default settings for 'normal use' are provided for immediate operation.

Motion Sensor Detection Range

Illustrates the detection range of the motion sensor, typically around 2-3 meters.

Functional Description: Modes and Functions

Mode 1: Open-Plan Office

Configures light behavior for open-plan offices, including dimming and auto-off.

Mode 2: Motion Sensor

Enables or disables the motion sensor for automatic light switching.

Mode 3: Constant Light Controller

Activates or deactivates the constant light controller for ambient light adaptation.

Mode 4: Power On Behavior

Defines whether the luminaire automatically turns on after a power interruption.

Mode 5: Saving the Light Level

Allows saving a specific light level and protects it from accidental changes.

Mode 6: Swarm Function

Details the optional LIGHTDIM CONNECT swarm function for networked control.

Light Lag Period

Sets the delay time before the luminaire switches off after no motion is detected.

Functional Description: Remote Control

Remote Control Functions

Describes the basic functions of the remote control unit for light operation.

Mode Changing Procedure

Instructions on how to change the operating mode using the remote control.

Parameter and Swarm Function Adjustment

Details on adjusting parameters like scene, light lag, and swarm settings.

Mounting the Base (Optional)

Connecting Foot Sections

Step-by-step guide to connect the foot sections and secure the shaft.

Cable and Clamp Adjustment

Instructions for routing the cable and adjusting the clamp for secure connection.

Technical Specifications and Guarantee

Battery Information

Specifies the battery type (CR2032) for the remote control unit.

Product Compliance and Suitability

Details protection class, LED replacement, power input, and workstation suitability.

Guarantee Information

Information on product warranty and how to handle complaints.

End Control Number and Warranty Details

TOBIAS GRAU XT-A FLOOR PLUS 120 Specifications