4st 2/2.5/3.5 2007
1
5) Tools
Use specified special tools to prevent damage to parts and
to perform work safely and correctly. Be sure to follow
installation procedures described in this manual and use
tightening torque specified.
6) Recommendations on Service
Remove foreign substances and dirt from outboard motor
and individual parts by cleaning. Apply recommended oil or
grease to rotating areas and sliding surfaces. Always
perform verifications such as ensuring smooth movement
and sealing.
1-3
MFS2sec01070524.qxd07.5.243:05 PM ページ3
To Next Page
Loading...
Need help?
General
