Tokheim WWC T1 - Page 103

WWC T1 Set Up & Maintenance Manual Maintenance Modes
Document Ref 905675-001 Rev 2 Page 6-35
Kernel versions 01.08 – 01.11
Issue B
Display Explanations/comments
ocb OCB menu.
Press 8 to enter OCB menu.
Traffic Lights menu.
LIGHtS Default 0 is flashing. Press 9 to change value to:-
0
0 = off
1 = Application dependent
2 = Default Traffic Lights on
Press 7 to go to next menu.
Press 0 to exit OCB menu.
P r o d Product Lights menu.
LIGHtS Default 0 is flashing. Press 9 to change value to:-
0
0 = off
1 = Application dependent
2 = Default Backlight for UPDs
Press 7 to go to next menu.
Press 0 to exit OCB menu.
U n I t Unit Price menu.
P r I c E Default 0 is flashing. Press 9 to change value to:-
0
0 = off
1 = Application dependent
2 = Default use of UPDs
Press 7 to go to next menu.
Press 0 to exit OCB menu.
I n P U t Preset Keypad menu.
P A d Default 0 is flashing. Press 9 to change value to:-
0
0 = off
1 = Application dependent
2 = Default use of preset keypad.
Press 0 to exit OCB menu.