Tokheim WWC T1 - Zsr

WWC T1 Set Up & Maintenance Manual Application Mode
Document Ref 905675-001 Rev 2 Page 7-5
Issue A
7.4 ZSR
Display Explanations/comments
d o S DOS Task Interface Timing menu.
tIm Note : SC30 specific timing delays are excluded and the release
no
process made quicker.
Default no is flashing. Press 9 to toggle to yes (select DOS/
Schenk interface).
d o S DOS Task Protocol Variant Handling menu.
c o n n Allows a workaround for certain DOS task specific protocol
no
handling to avoid incorrect status interpretations.
Default no is flashing. Press 9 to toggle to yes (select DOS/
Schenk interface).
v r c VRC Protocol Extensions menu.
c o n n Enables VRC related protocol extensions (for use with appropriate
no
controllers only).
Default no is flashing. Press 9 to toggle to yes (enable VRC
extensions).