Tokheim WWC T1 - Page 125

WWC T1 Set Up & Maintenance Manual Totals
Document Ref 905675-001 Rev 2 Page 9-3
Issue A
(Cont.)
Display Explanations/comments
At the Unit Price line, the t nr (total number of deliveries) and
p 1 (product 1) are flashing.
1 Replace the nozzle to continue reading the totals.
p1
Press 0 to return to Totals menu.
Lift the same nozzle for a fourth time.
------ The display will return to dashes.
------ Lift another nozzle to read its totals and repeat the process.
----
Press 0 to return to Totals menu.
P r o d Product Totals menu.
totAL Press 7 to select another type of total.
Press 0 to return to CONF menu.
Press 8 to enter this menu.
S U b Sub Totals menu.
totAL Press 9 to toggle between yes (enter Sub Totals menu) and
YES
no (go to next menu).
Press 0 to return to Totals menu.
Select yes and press 8 to enter this menu.
Mode selection menu.
ALonE
Press 9 to toggle between Alone (standalone mode) and
Cash or Conn (console mode).
Select Alone and press 7 to continue.
------ The display will return to dashes.
------ Lift a nozzle to read the sub-totals for that product.
----
Press 0 to return to Totals menu.
S U b Sub Totals menu.
totAL Press 9 to toggle between yes (enter Sub Totals menu) and
YES
no (go to next menu).
Press 0 to return to Prod Totals menu.
Select yes and press 8 to enter this menu.
Mode selection menu.
cASH
Press 9 to toggle between Alone (standalone) and Cash
(console).
Note : The displays may very between protocols.
Select cash and press 7 to continue.