Page 11-8 Document Ref 905675-001 Rev 2
Inspection Functions WWC T1 Set Up & Maintenance Manual
Issue A
11.15 Pulser Hide
If the Pulser Hide function is activated, the first X pulses dispensed do not appear on the
display i.e. the display remains 0. When next pulse (X+1) is received, the display will
show the total (X+1).
Press 8 to toggle between yes and no.
11.16 Preset Totalisers
If this function is activated, the Master 32 system can download its fuel totals into the
Calculator’s electronic totalizers.
Note : This function is only supported by the Master 32 system.
Press 8 to toggle between yes and no.
conF
X
YES
P rESE t
totAL
no
To Next Page
Loading...