Tokheim WWC T1 - OCB Board

WWC T1 Set Up & Maintenance Manual Appendix
Document Ref 905675-001 Rev 2 Page 12-13
Issue A
12.4.4 OCB BOARD
LED’s:
•LED_1 (H201 = YELLOW) Normal operation
•LED_2(H202 = GREEN) Key activated
Jumpers:
•W201 Test jumper
•W202 OPU Mode Selection
OFF : Horizontal use
ON : Vertical use (e.g. Harmony Dispensers)
•W501 Internal/external ground
(OFF is galvanic separated)
•W502 Internal/external power supply
(OFF is galvanic separated)
Note: OPTO_INPUT and OUT_SPARE are used by the release mechanism of
Fleet functionality - refer to section 2.5.2.
UPD_L
LCD_R
87C52
DIPNET
W202
H202
H201
LCD_L
KEY_L
KEY_R
UPD_R
W501
W502
W201
OPTO_INPUT
GROUND
A
MOUNT_2
A
MOUNT_1
VOLUME_2
VOLUME_1
POWER
OUT_SPARE
OUT_YELLOW
OUT_RED
OUT_GREEN
POWER