Page 2-24 Document Ref 905675-001 Rev 2
Product Information WWC T1 Set Up & Maintenance Manual
Issue B
EMT
Two EMT options are available for selection following a cold start:-
•Value “d” = double-sided EMT (each nozzle of a product has an individual EMT
total)
•Value “s” = single-sided EMT (the left and right totals of the same product are
added and output to the right EMT)
Cent Overshoot Hide
This function is designed around the cent overshoot problem. When the amount
on the display is a rounded value and the No Flow Timer has elapsed, the software
will mask an adjustable number of pulses, called P
mask
.
Note : This menu is only available with country code 33 (France).
Q500T1 Four Position Product Indicator (OCB)
This function is designed for the Q500T1 dispensers fitted with a small front
plate and 4 position product indicator. When set, the EMT/Product Indicator
Lights on the left side are shifted one position to the right:-
12345
1234
To Next Page
Loading...