Tokheim WWC T1 - MAINTENANCE MODE

Page 6-2 Document Ref 905675-001 Rev 2 Maintenance Modes WWC T1 Set Up & Maintenance Manual
6 MAINTENANCE MODE
6.1 General
Within the initial set up mode, the parameters for several functions are given a default value. To prevent fraud, selected Weights & Measures
related parameters defined during set up cannot be changed e.g. pulser hide, hose expansion, rounding type etc. - refer to Appendix B for further
information.
6.2 Maintenance Function Overview
(Cont.)
Issue B
K ER3 - Kienzle ER3, K S&B - Kienzle S&B
Function IFSF ZSR EPS Dun M3000 Tat Aut Dres K ER3 K S&B Tok Log EINF
Error Log
>
01.07XXXX X X
Event Log
>
01.07XXXX X X
Reset Log
>
01.07XXXX X X
Diag Log
>
01.08XXXX XXXX X X XXX
French Leak test (Fr leak test = on) >
03.04XXXX XXXX X X XXX
Esso Leak test (Esso leak test = on) >
03.05XXXX XXXX X X XXX
Country Code (read only) XXXX XXXX X X XXX
Euro
>
01.12XXXX XXXX X X XXX
Heavy Lei
>
04.05XXXX XXXX X X XXX
Scaling
>
02.11XXXX XXXX X X XXX
Gallon
>
03.09XXXX XXXX X X XXX
Dispenser Setup XXXX XXXX X X XXX
LPG functionality (LPG set ups only)
>
??? XXXX XXXX X X XXX
Thermal Protection XXXX XXXX X X XXX
FL Leak with:
>
03.05XXXX XXXX X X XXX
- French Vapour Leak (country = 033)
>
02.01XXXX XXXX X X XXX
- Flow Protection (AFM fuel leak)
>
=
03.02XXXX XXXX X X XXX
- Esso leak detection
>
03.05XXXX XXXX X X XXX
Fraud Detection (country = 33 & set ups
50,53,58,63 only)
>
03.04 X X X X X X X X X X X X X
Kernel
All
All
All