Page 6-14 Document Ref 905675-001 Rev 2
Maintenance Modes WWC T1 Set Up & Maintenance Manual
Issue A
6.12 Combined Hose Pre-selection and Display Timeout
The Combined Hose Pre-selection Menu is read-only and cannot be changed in this menu
(set up 90 and Tatsuno application only).
Display Explanations/comments
c H P r o Combined Hose Pre-selection menu (set up 90 and Tatsuno
P r E S E L application only).
YES Note : This value is fixed and canot be changed in this menu.
Press 7 to continue.
c H P r o Combined Hose Product Display Timeout menu (set up 90 and
d I S P L Tatsuno application only).
no Note : This value is fixed and canot be changed in this menu.
Press 7 to continue.
6.13 Electro-Mechanical Totaliser Mode (EMT) Functionality
The EMT Mode function will display the total number of EMTs connected. If the dispenser
is single-sided, only the EMT on side A/right side are functional.
Display Explanations/comments
Enn t EMT menu.
s = single sided; d = double-sided.
s Note : The value is fixed and cannot be changed in this menu.
Press 7 to continue.
To Next Page
Loading...