Tokheim WWC T1 - Page 96

Page 6-28 Document Ref 905675-001 Rev 2
Maintenance Modes WWC T1 Set Up & Maintenance Manual
Issue B
Display Explanations/comments
yyyyww Serial Number menu (only if AFM is connected and initialised).
nnnnnn information displayed:-
A F y yyyy = year
ww = week
nnnnnn = serial number
Press 7 to continue.
Press 0 to return to AFM selection menu.
vE rS AFM software menu.
0 b 0 1 AFM software version number is displayed 0B_01.
AF y
Press 7 to continue.
Press 0 to return to AFM selection menu.
F U E L Fuel Type menu.
G A S Values are Gas or Diesel.
AF y
Press 7 to continue.
Press 0 to return to AFM selection menu.
v o L U Volume Unit menu.
L I t E r Values are Liter or Gallon.
AF y
Press 7 to continue.
Press 0 to return to AFM selection menu.
C o m P Compensation mode menu.
2 Values are 2 or 3.
AF y
Press 7 to continue.
Press 0 to return to AFM selection menu.
c _ b l d K-Build Factor menu.
8000 Values are : 0x0000 - 0xFFFF (Hex)
A F y 0x8000 - 1,00000
Press 7 or 0 to return to AFM selection menu.