Need help?Do you have a question about the Tokyo Boeki Medisys BIOLIS 30I and is the answer not in the manual?
General| Type | Clinical Chemistry Analyzer |
|---|---|
| Model | BIOLIS 30I |
| Manufacturer | Tokyo Boeki Medisys |
| Reagent Positions | 30 |
| Light Source | Halogen Lamp |
| Photometric Range | 0 - 3.0 Abs |
| Power Supply | AC 100-240V, 50/60 Hz |
| Operating Temperature | 15-30°C |
| Sample Volume | 2-30 µL |
| Reagent Volume | 20-300 µL |
| Wavelengths | 340, 405, 505, 546, 578, 660, 700 nm |
| Operating Humidity | 30 - 80% (non-condensing) |
| Throughput | up to 240 tests/hour |
Classification of safety warnings and descriptions of hazard symbols used.
Detailed safety precautions and operational warnings for analyzer use.
Pre-operation checks including water supply, reservoirs, and reagent levels.
Configuration of analysis parameters like units, wavelengths, and sample volumes.
Procedure for setting reagent bottle positions and confirming tray configurations.
Steps for configuring reagent bottle information, including residual volume.
Inputting calibration conditions like sample position and concentration.
Steps for ordering calibration blank and standard samples.
Setting and executing calibration measurements for blank and standard samples.
Procedure for setting and measuring ISE calibration samples.
Configuring Quality Control parameters like control name and measurement positions.
Steps for ordering QC samples and confirming their placement on the tray.
Setting QC samples on the tray and initiating measurement.
Inputting patient sample details and selecting test items for analysis.
Placing patient samples on the tray and starting the measurement.
Performing checks and maintenance tasks after daily operation.
Interface for entering patient sample details and selecting tests.
Managing calibration settings, ordering, and viewing results.
Configuring, ordering, and reviewing Quality Control samples and results.
Setting analysis parameters for different test items like Optical, ISE, and HbA1c.
Accessing and performing various maintenance procedures for analyzer upkeep.
Essential safety warnings and precautions to follow during maintenance.
Step-by-step instructions for performing essential maintenance tasks.
To Next Page