Copyright by
CYTECH GmbH 2008
ENG 12
www.indoorcycling.com
2. To maintain the easy adjustability of the
saddle post, the saddle post should be
cleaned and lubricated. Remove the
saddle post out of the frame as described
on page 6. Apply a small amount of
lubricant spray to a lint-free cloth, and
clean the saddle post (A). Next, apply a
small amount of lubricant spray inside of
the rear frame sleeve. Then, reinsert the
saddle post into the frame and adjust it to
the desired height. Next, loosen the rear
adjustment knob and slide the saddle
carriage as far backward as possible. Apply
a small amount of lubricant spray to a lint-
free cloth, and clean the top of the saddle
slide (B). Then, slide the saddle carriage as
far forward as possible and clean the top of
the saddle slide. Finally, adjust the saddle
to the desired position.
3. To maintain the easy adjustability of the
handlebar post, the handlebar post should
be cleaned and lubricated. Remove the
handlebar post out of the frame as
described on page 7. Apply a small amount
of lubricant spray to a lint-free cloth and
clean the handlebar post (C). Next, apply a
small amount of lubricant spray inside of
the front frame sleeve. Then, reinsert the
handlebar post into the frame and adjust it
to the desired height.
To Next Page
Loading...
