2. To maintain the easy adjustability
of the saddle post, the saddle post
should be cleaned and lubricated.
Remove the saddle post out of the
frame as described on page 6. Apply a
small amount of lubricant spray to a
lint-free cloth, and clean the saddle
post (A). Next, apply a small amount
of lubricant spray inside of the rear
frame sleeve. Then, reinsert the
saddle post into the frame and adjust
it to the desired height.
Next, loosen the rear adjustment knob
and slide the saddle carriage as far
backward as possible. Apply a small
amount of lubricant spray to a lint-
free cloth, and clean the top of the
saddle slide (B). Then, slide the
saddle carriage as far forward as
possible and clean the top of the
saddle slide. Finally, adjust the saddle
to the desired position.
3. To maintain the easy adjustability
of the handlebar post, the handlebar
post should be cleaned and lubricated.
Remove the handlebar post out of the
frame as described on page 7. Apply a
small amount of lubricant spray to a
lint-free cloth and clean the handlebar
post (A). Next, apply a small amount
of lubricant spray inside of the front
frame sleeve.
Then, reinsert the handlebar post into
the frame and adjust it to the desired
height. Next, loosen the front
adjustment lever handle and slide the
handlebar carriage as far backward as
possible. Apply a small amount of
lubricant spray to a lint-free cloth, and
clean the top of the handlebar slide
(B). Then, slide the handlebar
carriage as far forward as possible
and clean the top of the handlebar
slide. Finally, adjust the handlebar to
the desired position.
To Next Page
Loading...
Need help?
General
