CAUTION: Used without the safety alert symbol, CAUTION indicates a potentially hazard-
ous situation which, if not avoided, may result in property damage.
1.2 Operating Safety
- DO NOT modify the machine without the prior consent of the manufacturer. We do not
assume responsibility for any accident due to equipment modification.
- NEVER operate the machine for any purpose for which it is not intended.
-Slip/Trip/Fall is a major cause of serious injury or death. Beware of uneven or slippery
work surface. Make sure to maintain firm balance when operating under such condi-
tions. Especially care when working in the vicinity of unprotected holes or excavations.
-NEVER allow any person to operate the machine without adequate instruction.
-ENSURE all operators read, understand and follow the operation instructions.
-Serious injury could result from improper or careless use of the machine.
-Plate compactors are heavy units and should be positioned by two people with appro-
priate strength, using the liing handle provided with the machine according to the
correct liing techniques.
-Plate Compactor may only be used for compaction jobs.
-DO NOT operate the machine unless all protective guards are in place.
-ENSURE that the engine switch is in the OFF position and the spark plug ignition lead is
disconnected before removing the guards or making adjustments.
-ENSURE both the machine and the operator are stable by setting up on level terrain so
that the machine will not tip over, slide o or fall while in operation or unattended.
-DO NOT leave the machine in operation, while it is unattended.
-DO NOT pull the machine backward with transportation wheels, it can only be pushed
forward.
-ENSURE that the soil or subsoil to be compacted has enough load carrying capacity.
-ENSURE that the area to be compacted does not contain any “live” electrical cables,
gas, or water, which may be damaged by the action of vibration.
-Exposure to vibration or repetitive work actions may be harmful to hands and arms.
-NEVER stand on the machine while it is operating.
-Be careful and DO NOT come in contact with the muler when the engine is hot, it can
cause severe burns.
-ENSURE that the repairs to the engine and machine are carried out by competent per-
sonnel.
-DO NOT use the machine near flammable material or in explosive environments.
4
To Next Page
Loading...
Need help?
General
