Tomahawk TPS25 Operations & Parts Manual

STOP
RUN
2
1
3
4
5
6
1
• Mix 30:1 2-Stroke Engine Oil to Gas mixture and pour it in the tank.
2
3
4
Fuel-injecting pump
Prime 3 – 5 times
S T A R T
• Slowly pour pesticide liquid
into the chemical tank
5
6
• Begin spraying
UP
DOWN
QUICK HOW-TO GUIDE
www.tomahawk-power.com
TPS25
-Do not add fuel while the
engine is hot or running
-Avoid filling the tank all
the way to the top
-Do not spill fuel on the
machine
-Keep away flammable
objects
-Smoking near the machine
is strictly prohibited
-Do not add fuel or operate
inside an enclosed area
-Do not add oil near fire
sources
(866) 577-4476
For questions call:
∙Double check that all connections
are correct and stable.
Start by assembling sprayer wands
Place washers inside brass connectors
Washers
∙Place washers inside brass
connectors & screw onto the machine.
• Place choke into its
closed position
• Pull the recoil starter a couple of
times until engine is running
• Move choke to the open
position
• Maintain the engine running
on idle for 3-5 minutes
2 stroke oil only

Tomahawk TPS25 Specifications

General

Brand	Tomahawk
Model	TPS25
Category	Paint Sprayer
Language	English