3-81
3) Click the [Next] button (1) and proceed in the window
of (Fig. 4).
4) Select [Display known driver of this device and select
its list.], next click the [Next] button (3), and proceed
in the next Window of (Fig. 5).
5) Select “Memory technology driver” (4) and click the
[Next] button (5), to proceed in the next Window of
(Fig. 6).
6) Select [Standard] (6) from the [Manufacturer]
Window, next select “Standard PCMCIA Memory
Card”, and “Standard PCMCIA Memory Card” (7).
Then click [Next] button (8) to proceed in the next
Window of (Fig. 8).
7) Since the warning Window is displayed, click the
[Yes] button.
8) Click the [Next] button in Fig. 8, so installing of the
driver will start. When this installing is finished, the
Window shown in Fig. 9 is displayed.
9) Click the [Complete] button.
10) In case such a Window as shown in Fig. 10, which
induces reactivation of the Window, is displayed,
click the [Yes] button to restart the system.
11) Start the Explorer (application) and make sure that the
removable disk has been displayed again.
To Next Page
Loading...
Need help?
General
