22.. CCOOMMPPOONNEENNTTSS
22..11 FFrroonntt aanndd rriigghhtt ssiiddee ooff AALL--22000000
AL-2000 Biometer & Pachymeter
5
22..11 FFrroonntt aanndd rriigghhtt ssiiddee ooff AALL--22000000
PPrriinntteerr
Prints measured data and calculated results
PPoowweerr iinnddiiccaattoorr
Lit when power is on.
PPrriinntteerr CCoovveerr
Remove the cover in order to replace the
printer paper.
PPrroobbee hhoollddeerrss
When the probes are not in use, place
them in the holders.
The upper holder is for the pachyme-
try probe.
The lower holder is for the biometry
probe.
TTeerrmmiinnaall ffoorr PPaacchhyymmeettrryy PPrroobbee
The probe for corneal thickness
measurement is connected here.
TTeerrmmiinnaall ffoorr BBiioommeettrryy PPrroobbee
The probe for axial length meas-
urement is connected here.
MMeemmoorryy ccaarrdd
Stores acquired data.
FFoooottsswwiittcchh
Depress to acquire data in the manual mea-
surment mode
BBiioommeettrryy pprroobbee
Use for axial length meas-
urement.
SSccrreeeenn ((ttoouucchh ppaanneell))
Measurement data and other information are
displayed on the screen. The instrument is
operated by touching the keys.
To Next Page
Loading...
