Tomey AL-2000 - Page 17

AL-2000 Biometer & Pachymeter
8
33..22 PPrreeppaarriinngg ffoorr UUssee
33..22..22 CCoonnnneeccttiioonn ooff aacccceessssoorriieess
aa)) IInnsseerrttiinngg tthhee pprroobbee hhoollddeerr
bb)) CCoonnnneeccttiinngg tthhee bbiioommeettrryy pprroobbee
cc)) CCoonnnneeccttiinngg tthhee ppaacchhyymmeettrryy pprroobbee
dd)) CCoonnnneeccttiinngg tthhee ppoowweerr ccoorrdd
1. Insert the protruding rectangular tabs (1)
on the probe holder into the holes (2) on
the right side of the instrument.
2. Push inward on the center of the probe
holder (3) and pull it downward to lock it
in place.
Plug the biometry probe connector (1) into
the terminal (2) labeled BIO on the right side
of the instrument. When it is properly insert-
ed, you will hear it click.
Plug the pachymetry probe connector (1)
into the terminal (2) labeled PACHY on the
right side of the instrument. When it is prop-
erly inserted, you will hear it click.
Plug the power cord connector (1) into the
terminal (2) on the back of the AL-2000