1. This equipment has been tested and
found to comply with the limits for medical
devices in EN60601-1-2. These limits are
designed to provide reasonable protection
against harmful interference in a typical
medical installation.
2. This equipment generates, uses and can
radiate radio frequency energy and if
not installed and used in a accordance
with the instructions, may cause harmful
interference to other devices in the vicinity.
However, there is no guarantee that
interference will not occur in a particular
installation.
3. If this equipment does cause harmful
interference to other devices, which can
be determined by turning the equipment
o and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
•
Reorient or relocate the receiving device.
•
Increase the separation between the
equipment.
•
Connect the equipment into an outlet on
a circuit dierent from that to which the
other device(s) are connected.
•
Consult the manufacturer or field service
technician for help.
Compliance with Federal
Communications Commission
Requirements
The power and voltage
consumed by the device when
pluged into a USB socket
Voltage 5v=
Power 3.5W
The product contains a Lithium
Ion Battery
IP21 Indicates that the unit is
resistant to condensation and
finger entry.
IP21
In some countries this is a
medical appliance and this
indicates that this product
has Applied Parts
Warning!
Serial number
The product is double insulated
(Class II Appliance)
Keep the device dry
Device Symbols
Transport and Storage Condition
Working condition
11
Temperature: 32 F - 113 F
Humidity: 10% - 85%
Atmospheric pressure: 850Hpa - 1060Hpa
Rated temperature range:
50F - 104F
Rated relative humidity: 10% - 85%
Rated atmospheric Pressure: 850Hpa - 1060Hpa
Long-term storage should be kept in a dry and cool place.
To Previous Page
Loading...
